• Section 1 - Preamble
• Section 2 - Purpose
• Section 3 - Scope
• Section 4 - Procedure
• Identification and determination of a material change
• Notification and reporting
• Material change register
• Timeframes
• Section 5 - Non-compliance

Section 1 - Preamble

(1) Charles Darwin University (‘the University’, ‘CDU’) is committed to complying with all legislative and regulatory requirements to ensure the delivery of high-quality education and to identify and mitigate potential and emerging risks to its operations.

(2) This procedure ensures compliance with:

1. Sections 29(1)(a - b) and 44G(1)(a - d) of the Tertiary Education Quality and Standards Agency Act 2011.
2. Part 2 – Registration (25) of the National Vocational Education and Training Regulator Act 2011.
3. Education Services for Overseas Students Act 2000.

Section 2 - Purpose

(3) The University is responsible for the timely disclosure and notification of material changes to regulators about incidents or events that may impact on the University’s ability to comply with relevant regulatory bodies or that require changes to the National Register or ASQAnet.

Section 3 - Scope

(4) This procedure applies to all university staff and any event or incident which impacts the University’s ability to comply with the relevant regulatory Acts relating to Higher Education and Vocational Education and Training.

(5) This procedure outlines the process of notifying material changes to regulators on matters including, but not limited to:

1. changes to legal status or ownership;
2. changes to key personnel who participate in decision-making or exercise control and influence over the management or influence of persons in VET and higher education, including but not limited to the Chancellor, Vice-Chancellor, and Provost;
3. adverse findings;
4. events which impact on financial viability;
5. third party arrangements; and
6. events or incidents which impact on student or staff experience, safety and learning, including:
   1. breaches of academic integrity involving more than one student;
   2. new delivery sites;
   3. changes to professional accreditation; and
   4. critical incidents.

Section 4 - Procedure

(6) The University will appoint a primary contact for each regulator.

1. The Vice-President Governance and University Secretary is the primary TEQSA contact;
2. The Vice-Chancellor is the primary ASQA contact.

(7) The primary contact will consider and determine events (or combination of events) that will affect the University’s ability to comply with the relevant regulations.

Identification and determination of a material change

(8) All material changes which have occurred or are likely to occur must be raised to the relevant primary contact for consideration.

(9) On advice from the relevant member of the Senior Executive Team or Academic Quality and Integrity team, the primary contact will consider the:

1. nature of the change;
2. impacts of the change; and
3. risks and potential consequences.

(10) The primary contact will determine whether the event will affect the University’s ability to comply with the relevant regulations and decide whether it is reportable.

1. Reportable events: Where a material change is deemed to be of such a nature to significantly affect operations and/or the University’s administrative structure, the University is required to notify the relevant regulatory bodies as a condition of continued registration.
2. Non reportable events: Where a material change is not deemed to require reporting to the relevant regulatory bodies, internal reporting and registering should occur to ensure that the appropriate risk assessments have taken place and to ensure that reports are available for the relevant regulatory bodies if required.

(11) Approvals by regulators are required for some changes, including: 

1. changes to arrangements with other providers, including third party delivery;
2. changes to the maximum number of students that can be enrolled;
3. changes to the duration of a CRICOS registered course; 
4. new delivery sites where a CRICOS registered course will be delivered; and
5. any offshore delivery, including the commencement, cessation, relocation, or third party delivery of an Australian course

(12) Changes outlined in Clause 11 (see above) must not be implemented prior to approval from ASQA or TEQSA.

Notification and reporting

(13) When an event is considered to be reportable, the Academic Quality and Integrity team will document the Material Change Notification.

(14) Material Change Notifications will include:

1. the details of the risks and impacts of the changes (if relevant);
2. the measures to be undertaken to ensure minimum disruption or impact on students and staff; and
3. mitigations to ensure future compliance.

(15) Notifications will be approved by the primary contact and submitted within the timeframes in Clause 20.

(16) Notifications must be submitted by staff who are registered contacts on the TEQSA portal or ASQAnet.

(17) A regulator may investigate the material change notification based on the perceived risk and will determine if any further action and/or if a request for information is required. When a request for information is received, the relevant Responsible Executive Officer and the Academic Quality and Integrity team will be notified.

Material change register

(18) The Material Change Register will record details of reportable and non-reportable events.

(19) The register will include the details about the event or incident, the relevant Responsible Executive Officer, and the status of the notification, including any requests for information from the regulator.

(20) The register will be maintained by Teaching and Learning Connect.

(21) A summary of material changes will be reported to the Audit, Risk and Compliance Committee for monitoring and assessment of risks.

Timeframes

(22) Material change notifications must be reported within the relevant regulators prescribed timeframes, as follows:

Section 5 - Non-compliance

(23) Non-compliance with governance documents is considered a breach of the Code of Conduct - Employees or the Code of Conduct - Students, as applicable, and is treated seriously by the University. Reports of concerns about non-compliance will be managed in accordance with the applicable disciplinary procedures outlined in the Charles Darwin University and Union Enterprise Agreement 2025 and the Code of Conduct - Students.

(24) Complaints may be raised in accordance with the Complaints and Grievance Policy and Procedure - Employees and Complaints Policy - Students.

(25) All staff members have an individual responsibility to raise any suspicion, allegation or report of fraud or corruption in accordance with the Fraud and Corruption Control Policy and Whistleblower Reporting (Improper Conduct) Procedure.